sipping
Network Working Group                                          M. Hasebe
Internet-Draft
Request for Comments: 5407                                    J. Koshiko
Intended status: BCP
BCP: 147                                            NTT-east Corporation
Expires: March 27, 2009
Category: Best Current Practice                                Y. Suzuki
                                                         NTT Corporation
                                                            T. Yoshikawa
                                                    NTT-east Corporation
                                                              P. Kyzivat
                                                     Cisco Systems, Inc.
                                                      September 23,
                                                           December 2008

              Example calls flows Call Flows of race conditions Race Conditions in the
                   Session Initiation Protocol (SIP)
                  draft-ietf-sipping-race-examples-06

Status of this This Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of

   This document specifies an Internet Best Current Practices for the
   Internet Engineering
   Task Force (IETF), its areas, Community, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid requests discussion and suggestions for a maximum
   improvements.  Distribution of six months this memo is unlimited.

Copyright Notice

   Copyright (c) 2008 IETF Trust and may be updated, replaced, or obsoleted by other documents at any
   time.  It the persons identified as the
   document authors.  All rights reserved.

   This document is inappropriate subject to use Internet-Drafts as reference
   material or BCP 78 and the IETF Trust's Legal
   Provisions Relating to cite them other than as "work IETF Documents (http://trustee.ietf.org/
   license-info) in progress."

   The list effect on the date of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list publication of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on March 27, 2009. this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.

Abstract

   This document gives examples example call flows of race conditions in the
   Session Initiation Protocol (SIP).  Race conditions are inherently
   confusing and difficult to thwart; this document shows the best
   practices to handle them.  The elements in these call flows include
   SIP User Agents and SIP Proxy Servers.  Call flow diagrams and
   message details are given.

Table of Contents

   1.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .  4  3
     1.1.  General Assumptions  . . . . . . . . . . . . . . . . . . .  4  3
     1.2.  Legend for Message Flows . . . . . . . . . . . . . . . . .  4  3
     1.3.  SIP Protocol Assumptions . . . . . . . . . . . . . . . . .  5  4
   2.  The Dialog State Machine for INVITE dialog usage Dialog Usage . . . . . . .  6  5
   3.  Race Conditions  . . . . . . . . . . . . . . . . . . . . . . . 11 10
     3.1.  Receiving message Message in the Moratorium State  . . . . . . . . 12 11
       3.1.1.  Callee receives Receives Initial INVITE retransmission Retransmission
               (Preparative state) while State) While in the Moratorium state State  . . 12 11
       3.1.2.  Callee receives Receives CANCEL (Early state) when State) While in the
               Moratorium state State . . . . . . . . . . . . . . . . . . . 14 13
       3.1.3.  Callee receives Receives BYE (Early state) while State) While in the
               Moratorium state State . . . . . . . . . . . . . . . . . . . 16 15
       3.1.4.  Callee receives Receives re-INVITE (Established state)
               while State)
               While in the Moratorium state (case State (Case 1) . . . . . . . . 18 17
       3.1.5.  Callee receives Receives re-INVITE (Established state)
               while State)
               While in the Moratorium state (case State (Case 2) . . . . . . . . 23 22
       3.1.6.  Callee receives Receives BYE (Established state) while State) While in
               the Moratorium state State . . . . . . . . . . . . . . . . . 27 26
     3.2.  Receiving message Message in the Mortal State  . . . . . . . . . . 29 28
       3.2.1.  UA receives Receives BYE (Established state) while State) While in the
               Mortal state State . . . . . . . . . . . . . . . . . . . . . 30 28
       3.2.2.  UA receives Receives re-INVITE (Established state) while State) While in
               the Mortal state State . . . . . . . . . . . . . . . . . . . 32 30
       3.2.3.  UA receives Receives 200 OK for re-INVITE (Established
               state) while
               State) While in the Mortal state State . . . . . . . . . . . 34 32
       3.2.4.  Callee receives Receives ACK (Moratorium state) while State) While in
               the Mortal state State . . . . . . . . . . . . . . . . . . . 37 35
     3.3.  Other race conditions Race Conditions  . . . . . . . . . . . . . . . . . . 38 36
       3.3.1.  Re-INVITE crossover Crossover  . . . . . . . . . . . . . . . . . 38 36
       3.3.2.  UPDATE and re-INVITE crossover Crossover . . . . . . . . . . . . 44 40
       3.3.3.  Receiving REFER (Established state) while State) While in the
               Mortal state State . . . . . . . . . . . . . . . . . . . . . 48 45
   4.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 50
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 50
   6. 46
   5.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 50
   7. 46
   6.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 50
     7.1. 47
     6.1.  Normative References . . . . . . . . . . . . . . . . . . . 50
     7.2. 47
     6.2.  Informative References . . . . . . . . . . . . . . . . . . 51 47
   Appendix A.  BYE in the Early Dialog . . . . . . . . . . . . . . . 51 48
   Appendix B.  BYE request overlapping Request Overlapping with re-INVITE  . . . . . . . 53 49
   Appendix C.  UA's behavior Behavior for CANCEL  . . . . . . . . . . . . . . 56 52
   Appendix D.  Notes on the request Request in the Mortal state State  . . . . . . 58 54
   Appendix E.  Forking and receiving new Receiving New To tags . . . . . . . . . . 58
   Authors' Addresses . . . . . . . . . Tags . . . . . . . . . . . . . . . 63
   Intellectual Property and Copyright Statements . . . . . . . . . . 65 54

1.  Overview

   The call flows shown in this document were developed in the design of
   a SIP IP communications network.  These examples are of race
   conditions, which stem from transitions in dialog states; states -- mainly
   transitions during session establishment after the sending of an
   INVITE.

   When implementing SIP, various complex situations may arise.
   Therefore, it is helpful to provide implementors of the protocol with
   examples of recommended terminal and server behavior.

   This document clarifies SIP UA User Agent (UA) behaviors when messages
   cross each other as race conditions.  By clarifying the operation
   under race conditions, inconsistent interpretations between
   implementations are avoided and interoperability is expected to be
   promoted.

   It is the hope of the authors that this document will be useful for
   SIP implementors, designers, and protocol researchers and will help
   them achieve the goal of a standard implementation of RFC 3261 [1].

   These call flows are based on the version 2.0 of SIP SIP, defined in RFC 3261 [1]
   [1], with SDP usage as described in RFC 3264 [2].

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, RFC 2119 [3].

1.1.  General Assumptions

   A number of architectural, network, and protocol assumptions underlie
   the call flows in this document.  Note that these assumptions are not
   requirements.  They are outlined in this section so that they may be
   taken into consideration and help understanding of the call flow
   examples.

   These flows do not assume specific underlying transport protocols
   such as TCP, TLS, and UDP.  See the discussion in RFC 3261 [1] for
   details of the transport issues for SIP.

1.2.  Legend for Message Flows

   Dashed lines (---) and slash lines (/, \) represent signaling
   messages that are mandatory to the call scenario.  (X) represents the
   crossover of signaling messages. (->x, x<-) indicate that the packet
   is lost.  The arrow indicates the direction of message flow.  Double
   dashed lines (===) represent media paths between network elements.

   Messages are identified in the figures as F1, F2, etc.  These numbers
   are used for references to the message details that follow the
   Figure.
   figure.  Comments in the message details are shown in the following
   form:

   /* Comments.  */

1.3.  SIP Protocol Assumptions

   This document does not prescribe the flows precisely as they are
   shown, but rather illustrates the principles for best practice.  They
   are best practice usages (orderings, syntax, selection of features
   for the purpose, or handling of errors) of SIP methods, headers headers, and
   parameters.  Note: The flows in this document must not be copied
   as-is by implementors because additional annotations have been
   incorporated into this document for ease of explanation.  To sum up,
   the procedures described in this document represent well-reviewed
   examples of SIP usage, which exemplify best common practice according
   to IETF consensus.

   For reasons of simplicity in reading and editing the document, there
   are a number of differences between some of the examples and actual
   SIP messages.  For instance, Call-IDs are often replicated, CSeq
   often begins at 1, header fields are usually shown in the same order,
   usually only the minimum required header field set is shown, and
   other headers which that would usually be included included, such as Accept, Allow,
   etc.
   etc., are not shown.

   Actors:

   Element     Display Name  URI                            IP Address
   -------     ------------  ---                            ----------

   User Agent  Alice         sip:alice@atlanta.example.com  192.0.2.101
   User Agent  Bob           sip:bob@biloxi.example.com     192.0.2.201
   User Agent  Carol         sip:carol@chicago.example.com  192.0.2.202
   Proxy Server              ss.atlanta.example.com         192.0.2.111

   The term "session" is used in this document in the same way it is
   used in Sections 13-15 of RFC 3261 [1] sections 13-15.  (Which (which differs somewhat from
   the definition of the term in RFC 3261.) 3261).  RFC 5057 [6] introduces
   another term, "invite dialog usage", which is more precisely defined.
   The term "session" used herein is almost, but not quite, identical to
   the term "invite dialog usage".  The two have differing definitions
   of when the state ends -- the session ends earlier, when BYE is sent
   or received.

2.  The Dialog State Machine for INVITE dialog usage Dialog Usage

   Race conditions are generated when the dialog state of the receiving
   side differs from that of the sending side.

   For instance, a race condition occurs when a UAC (User Agent Client)
   sends a CANCEL in the Early state while the UAS (User Agent Server)
   is transitioning from the Early state to the Confirmed state by
   sending a 200 OK to an initial INVITE (indicated as "ini-INVITE"
   hereafter).  The DSM (dialog state machine) for the INVITE dialog
   usage is presented as follows to help understanding of the UA's
   behavior in race conditions.

   The DSM clarifies the UA's behavior by subdividing the dialog state
   shown in RFC 3261 [1] into various internal states.  We call the
   state before the establishment of a dialog the Preparative state.
   The Confirmed state is subdivided into two substates, the Moratorium
   and the Established states, and the Terminated state is subdivided
   into the Mortal and Morgue states.  Messages which that are the triggers
   for the state transitions between these states are indicated with
   arrows.  In this figure, messages which that are not related to state
   transition are omitted.

   Below are the DSMs, first for the caller and then for the callee.

    INV +-----------------------------------------------+
    --->|                 Preparative                   |
        +-----------------------------------------------+
          |                    |                      |
          | 3xx-6xx            | 1xx-tag              | 2xx
          |                    |                      |
          |                    |        1xx-tag       |
          |                    V        w/new tag     |
          |         +-----------------+  [new DSM]    |
          | 3xx-6xx |                 |   | (new DSM  |
          +<--------|      Early      |   |  instance |
          |         |                 |<--+  created) |
          |         +-----------------+               |
          |            |             |                |  2xx w/new tag
          |            | BYE         | 2xx            |   [new DSM]
          |            |             +------------>+<-+      | (new DSM
          |            |                           |         |  instance
    +-----C------------C-----+         +-----------C------+  |  created)
    |     | Terminated |     |         | Confirmed |      |  |
    |     |            +<----C---------|           |      |  |
    |     |            |     | BYE(sr) |           |      |  |
    |     |            V     |         |           V      |  |
    | 2xx |  +-----------+   |         |   +-----------+  |  |
    | +---C--|           |---C-+       |   |           |  |  |
    | |   |  |   Mortal  |   | | BYE(r)|   | Moratorium|<-C--+
    | +---C->|           |<--C-+       |   |           |  |
    | ACK |  +-----------+   |         |   +-----------+  |
    |     |    |             |         |         |        |
    |     |    | Timeout     |         |         | ACK    |
    |     |    |             |         |         |        |
    |     V    V             |         |         V        |
    |   +---------------+    |         |   +-----------+  |
    |   |               |    |         |   |           |--C-+
    |   |     Morgue    |    |         |   |Established|  | | 2xx,ACK
    |   |               |    |         |   |           |<-C-+
    |   +---------------+    |         |   +-----------+  |
    |                        |         |                  |
    +------------------------+         +------------------+

    (r): indicates that only reception is allowed.
         Where (r) is not used as an indicator, "response" means
         receive, and "request" means send.
    (sr): indicates that both sending and reception are allowed.

              Figure 1: DSM for INVITE dialog usage (Caller) (caller)
   Figure 1 represents the caller's DSM for the INVITE dialog usage.
   The caller MAY send a BYE in the Early state, even though this
   behavior is not recommended.  A BYE sent in the Early state
   terminates the early dialog using a specific To tag.  That is, when a
   proxy is performing forking, the BYE is only able to terminate the
   early dialog with a particular UA.  If the caller wants to terminate
   all early dialogs instead of that with a particular UA, it needs to
   send CANCEL, not BYE.  However, it is not illegal to send BYE in the
   Early state to terminate a specific early dialog if this is to the
   caller's intent.  Moreover, until the caller receives a final
   response and terminates the INVITE transaction, the caller MUST be
   prepared to establish a dialog by receiving a new response to the
   INVITE even if it has already sent a CANCEL or BYE and terminated the
   dialog (see Appendix A).

    INV +-----------------------------------------------+
    --->|                 Preparative                   |
        +-----------------------------------------------+
          |                         |                 |
          | 3xx-6xx                 | 1xx-tag         | 2xx
          |                         |                 |
          |                         V                 |
          |         +------------------+              |
          | 3xx-6xx |                  |              |
          +<--------|      Early       |              |
          |         |                  |              |
          |         +------------------+              |
          |            |             |                |
          |            |BYE/487(INV) | 2xx            |
          |            |             +------------>+<-+
          |            |                           |
    +-----C------------C-----+         +-----------C------+
    |     | Terminated |     |         | Confirmed |      |
    |     |            +<----C---------|           |      |
    |     |            |     | BYE(sr) |           |      |
    |     |            V     |         |           V      |
    |     | +------------+   |         |   +-----------+  |
    |     | |            |---C-+       |   |           |--C-+
    |     | |   Mortal   |   | | BYE   |   | Moratorium|  | | 2xx
    |     | |            |<--C-+       |   |           |<-C-+ if ACK not
    |     | +------------+   |         |   +-----------+  |   received
    |     |   |              |         |         |        |
    |     |   | Timeout      |         |         | ACK    |
    |     |   |              |         |         |        |
    |     V   V              |         |         V        |
    |   +---------------+    |         |   +-----------+  |
    |   |               |    |         |   |           |  |
    |   |     Morgue    |    |         |   |Established|  |
    |   |               |    |         |   |           |  |
    |   +---------------+    |         |   +-----------+  |
    |                        |         |                  |
    +------------------------+         +------------------+

     (sr): indicates that both sending and reception are allowed.
          Where (sr) is not used as an indicator, "response" means send,
          and "request" means receive.

              Figure 2: DSM for INVITE dialog usage (Callee) (callee)

   Figure 2 represents the callee's DSM for the INVITE dialog usage.
   The figure does not illustrate the state transition related to CANCEL
   requests.  A CANCEL request does not cause a dialog state transition.
   However, the callee terminates the dialog and triggers the dialog
   transition by sending a 487 immediately after the reception of the
   CANCEL.  This behavior upon the reception of the CANCEL request is
   further explained in Appendix C.

   The UA's behavior in each state is as follows.

   Preparative (Pre):  The Preparative state is in effect until the
      early dialog is established by sending or receiving a provisional
      response with a To tag after an ini-INVITE is sent or received.
      The dialog does not yet exist in the Preparative state.  If the UA
      sends or receives a 2xx response, the dialog state transitions
      from the Preparative state to the Moratorium state, which is a
      substate of the Confirmed state.  In addition, if the UA sends or
      receives a 3xx-6xx response response, the dialog state transitions to the
      Morgue state state, which is a substate of the Terminated state.
      Sending an ACK for a 3xx-6xx response and retransmissions of 3xx-6xx 3xx-
      6xx are not shown on the DSMs because they are sent by the INVITE
      transaction.

   Early (Ear):  The early dialog is established by sending or receiving
      a provisional response except 100 Trying.  The early dialog exists
      even though the dialog does not exist in this state yet.  The
      dialog state transitions from the Early state to the Moratorium
      state, a substate of the Confirmed state, by sending or receiving
      a 2xx response.  In addition, the dialog state transitions to the
      Morgue state, a substate of the Terminated state, by sending or
      receiving a 3xx-6xx response.  Sending an ACK for a 3xx-6xx
      response and retransmissions of 3xx-6xx are not shown on this DSM
      because they are automatically processed on the transaction layer
      and don't influence the dialog state.  The UAC may send a CANCEL
      in the Early state.  The UAC may also send a BYE (although it is
      not recommended).  The UAS may send a 1xx-6xx response.  The
      sending or receiving of a CANCEL request does not have a direct
      influence on the dialog state.  The UA's behavior upon the
      reception of the CANCEL request is explained further in Appendix
      C.

   Confirmed (Con):  The sending or receiving of a 2xx final response
      establishes a dialog.  The dialog starts in this state.  The
      Confirmed state transitions to the Mortal state, a substate of the
      Terminated state, by sending or receiving a BYE request.  The
      Confirmed state has two substates, the Moratorium and the
      Established states, which are different with regard to the
      messages that UAs are allowed to send.

   Moratorium (Mora):  The Moratorium state is a substate of the
      Confirmed state and inherits its behavior.  The Moratorium state
      transitions to the Established state by sending or receiving an
      ACK request.  The UAC may send an ACK and the UAS may send a 2xx
      final response.

   Established (Est):  The Established state is a substate of the
      Confirmed state and inherits its behavior.  Both caller and callee
      may send various messages which that influence a dialog.  The caller
      supports the transmission of ACK to the retransmission of a 2xx
      response to an ini-INVITE.

   Terminated (Ter):  The Terminated state is subdivided into two
      substates, the Mortal and Morgue states, to cover the behavior
      when a dialog is being terminated.  In this state, the UA holds
      information about the dialog which that is being terminated.

   Mortal (Mort):  The caller and callee enter the Mortal state by
      sending or receiving a BYE.  The UA MUST NOT send any new requests
      within the dialog because there is no dialog.  (Here  (Here, the new
      requests do not include ACK for 2xx and BYE for 401 or 407 407, as
      further explained in Appendix D below.)  In the Mortal state, BYE
      can be accepted, and the other messages in the INVITE dialog usage
      are responded to with an error.  This addresses the case where a
      caller and a callee exchange reports about the session when it is
      being terminated.  Therefore  Therefore, the UA possesses dialog information
      for internal processing but the dialog shouldn't be externally
      visible.  The UA stops managing its dialog state and changes it to
      the Morgue state, state when the BYE transaction is terminated.

   Morgue (Morg):  The dialog no longer exists in this state.  The
      sending or receiving of signaling which that influences a dialog is not
      performed.  (A dialog is literally terminated.)  The caller and
      callee enter the Morgue state via the termination of the BYE or
      INVITE transaction.

3.  Race Conditions

   This section details a race condition between two SIP UAs, Alice and
   Bob.  Alice (sip:alice@atlanta.example.com) and Bob
   (sip:bob@biloxi.example.com) are assumed to be SIP phones or SIP-
   enabled devices.  Only significant signaling is illustrated.  Dialog
   state transitions caused by the sending or receiving of SIP messages
   are shown shown, and race conditions are indicated by '*race*'.  (For
   abbreviations for the dialog state transitions, refer to Section 2.)
   '*race*' indicates the moment when a race condition occurs.

   Examples of race conditions are described below.

3.1.  Receiving message Message in the Moratorium State

   This section shows some examples of call flow race conditions when
   receiving messages from other states while in the Moratorium state.

3.1.1.  Callee receives Receives Initial INVITE retransmission Retransmission (Preparative
        state) while
        State) While in the Moratorium state State

   State  Alice                               Bob  State
          |                                     |
          |            ini-INVITE F1            |
          |------------------------------------>|
     Pre  |         180 F2(Packet loss)         |  Pre
          |            x<-----------------------|
          |                                     |  Ear
          | ini-INVITE F4(=F1)           200 F3 |
          |------------------     --------------|
          |                   \ /               |  Mora
          |                    X                |
          |                   / \               |
          |<-----------------     ------------->|  *race*
    Mora  |                ACK F5               |
          |------------------------------------>|
     Est  |                                     |  Est
          |                                     |

   This scenario illustrates the race condition which that occurs when the UAS
   receives a Preparative message while in the Moratorium state.  All
   provisional responses to the initial INVITE (ini-INVITE F1) are lost,
   and the UAC retransmits an ini-INVITE (F4).  At the same time as this
   retransmission, the UAS generates a 200 OK (F3) to the ini-
   INVITE ini-INVITE and
   terminates the INVITE server transaction, according to Section
   13.3.1.4 of RFC 3261 [1].

   However, it is reported that terminating an INVITE server transaction
   when sending a 200 OK is an essential correction to SIP [7].
   Therefore, the INVITE server transaction is not terminated by F3, and
   the
   F4 MUST be handled properly as a retransmission.

   In RFC 3261 [1], it is not specified whether the UAS retransmits 200
   to the retransmission of ini-INVITE.  Considering the retransmission
   of 200 triggered by a timer (the TU transaction user (TU) keeps
   retransmitting 200 based on T1 and T2 until it receives an ACK),
   according to Section 13.3.1.4 of RFC 3261 [1], it seems unnecessary
   to retransmit 200 when the UAS receives the retransmission of the
   ini-INVITE.  (For implementation, it does not matter if the UAS sends
   the retransmission of 200, since the 200 does not cause any problem.)
   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   /* 180 response is lost and does not reach Alice.  */

   F3 200 OK Bob -> Alice

   /* According to Section 13.3.1.4 of RFC 3261 [1], the INVITE server
      transaction is terminated at this point.  However, this has been
      reported as an essential correction to SIP, and the UAS MUST
      correctly recognize the ini-INVITE (F4) as a retransmission.  */

   F4 INVITE (retransmission) Alice -> Bob

   /* F4 is a retransmission of F1.  They are exactly the same INVITE
      request.  For UAs that have not dealt with the correction [7] (an
      INVITE server transaction is terminated when sending 200 to
      INVITE), this request does not match the transaction as well as
      the dialog since it does not have a To tag.  However, Bob must
      recognize the retransmitted INVITE correctly, without treating it
      as a new INVITE.  */

   F5 ACK Alice -> Bob

3.1.2.  Callee receives Receives CANCEL (Early state) when State) While in the Moratorium state
        State

   State  Alice                        Bob  State
          |                              |
          |          INVITE F1           |
          |----------------------------->|
     Pre  |       180 Ringing F2         |  Pre
          |<-----------------------------|
     Ear  |                              |  Ear
          |CANCEL F3       200(INVITE) F4|
          |------------     -------------|
          |             \ /              |  Mora
          |              X               |
          |             / \              |
          |<-----------     ------------>|  *race*
    Mora  |                              |
          | ACK F6         200(CANCEL) F5|
          |------------     -------------|
     Est  |             \ /              |
          |              X               |
          |             / \              |
          |<-----------     ------------>|
          |                              |  Est
          |       One Way RTP Media      |
          | (Two Way RTP Media possible) |
          |<=============================|
          |            BYE F7            |
          |----------------------------->|
    Mort  |            200 F8            |  Mort
          |<-----------------------------|
          | ^                          ^ |
          | | Timer K                  | |
          | V                          | |
    Morg  |                    Timer J | |
          |                            V |
          |                              |  Morg
          |                              |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Early message, CANCEL, while in the Moratorium state.
   Alice sends a CANCEL CANCEL, and Bob sends a 200 OK response to the initial
   INVITE message at the same time.  As described in the previous
   section, according to RFC 3261 [1], an INVITE server transaction is
   supposed to be terminated by a 200 response, but this has been
   corrected in [7].

   This section describes a case in which an INVITE server transaction
   is not terminated by a 200 response to the INVITE request.  In this
   case, there is an INVITE transaction which that the CANCEL request matches,
   so a 200 response to the request is sent.  This 200 response simply
   means that the next hop receives the CANCEL request
   (Successful (successful
   CANCEL (200) does not mean the INVITE was actually canceled).  When a
   UAS has not dealt with the correction [7], the UAC MAY receive a 481
   response to the CANCEL since there is no transaction which that the CANCEL
   request matches.  This 481 simply means that there is no matching
   INVITE server transaction and CANCEL is not sent to the next hop.
   Regardless of the success/failure of the CANCEL, Alice checks the
   final response to the INVITE, and if she receives 200 to the INVITE
   request she immediately sends a BYE and terminates the dialog.  (Section  (See
   Section 15, RFC 3261 [1]) [1].)

   From the time F1 is received by Bob until the time that F8 is sent by
   Bob, media may be flowing one way from Bob to Alice.  From the time
   that an answer is received by Alice from Bob Bob, there is the
   possibility that media may flow from Alice to Bob as well.  However,
   once Alice has decided to cancel the call, she presumably will not
   send media, so practically speaking the media stream will remain one
   way.

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 CANCEL Alice -> Bob

   /* Alice sends a CANCEL in the Early state.  */

   F4 200 OK (INVITE) Bob -> Alice

   /* Alice receives a 200 to INVITE (F1) in the Moratorium state.
      Alice has the potential to send as well as receive media, but in
      practice will not send because there is an intent to end the
      call.  */

   F5 200 OK (CANCEL) Bob -> Alice

   /* 200 to CANCEL simply means that the CANCEL was received.  The 200
      response is sent, since this case assumes the correction [7] has
      been made.  If an INVITE server transaction is terminated
      according to the procedure stated in RFC 3261 [1], the UAC MAY
      receive a 481 response instead of 200.  */
   F6 ACK Alice -> Bob

   /* INVITE is successful, and the CANCEL becomes invalid.  Bob
      establishes RTP streams.  However, the next BYE request
      immediately terminates the dialog and session.  */

   F7 BYE Alice -> Bob

   F8 200 OK Bob -> Alice

3.1.3.  Callee receives Receives BYE (Early state) while State) While in the Moratorium state State

   State  Alice                          Bob  State
          |                                |
          |         ini-INVITE F1          |
          |------------------------------->|
     Pre  |            180 F2              |  Pre
          |<-------------------------------|
     Ear  |                                |  Ear
          |    BYE F4        200(INVITE) F3|
          |-------------     --------------|
    Mort  |              \ /               |  Mora
          |               X                |
          |              / \               |
          |<------------     ------------->|  *race*
          |                                |  Mort
          |    ACK F5         200(BYE) F6  |
          |-------------     --------------|
          |              \ /            ^  |
          |               X             |  |
          |              / \            |  |
          |<------------     ------------->|
          | ^                           |  |
          | | Timer K                   |  |
          | V                           |  |
    Morg  |                     Timer J |  |
          |                             V  |
          |                                |  Morg
          |                                |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Early message, BYE, while in the Moratorium state.  Alice
   sends a BYE in the Early state state, and Bob sends a 200 OK to the initial
   INVITE request at the same time.  Bob receives the BYE in the
   Confirmed dialog state although Alice sent the request in the Early
   state (As (as explained in Section 2 and Appendix A, this behavior is not
   recommended).  When a proxy is performing forking, the BYE is only
   able to terminate the early dialog with a particular UA.  If the
   caller wants to terminate all early dialogs instead of only that with
   a particular UA, it needs to send CANCEL, not BYE.  However, it is
   not illegal to send BYE in the Early state to terminate a specific
   early dialog if that is the caller's intent.

   The BYE functions normally even if it is received after the INVITE
   transaction termination because BYE differs from CANCEL, and is sent
   not to the request but to the dialog.  Alice enters the Mortal state
   on sending the BYE request, and remains Mortal until the Timer K
   timeout occurs.  In the Mortal state, the UAC does not establish a
   session,
   session even though it receives a 200 response to the INVITE.  Even
   so, the UAC sends an ACK to 200 in order to complete the INVITE
   transaction.  The ACK is always sent to complete the three-way
   handshake of the INVITE transaction (Further (further explained in Appendix D
   below).

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK (ini-INVITE) Bob -> Alice

   F4 BYE Alice -> Bob

   /* Alice transitions to the Mortal state upon sending BYE.
      Therefore, after this, she does not begin a session even though
      she receives a 200 response with an answer.  */

   F5 ACK Alice -> Bob

   F6 200 OK (BYE) Bob -> Alice

3.1.4.  Callee receives Receives re-INVITE (Established state) while State)  While in the
        Moratorium state (case State (Case 1)

   State  Alice                          Bob  State
          |                                |
          |    ini-INVITE w/offer1 F1      |
          |------------------------------->|
     Pre  |             180 F2             |  Pre
          |<-------------------------------|
     Ear  |                                |  Ear
          |   200(ini-INV) w/answer1 F3    |
          |<-------------------------------|
    Mora  |       ACK F4(packet loss)      |  Mora
          |-------------------->x          |
     Est  |                                |
          | re-INVITE F6      200 F5(=F3)  |
          |   w/offer2         w/answer1   |
          |-------------     --------------|
          |              \ /               |
          |               X                |
          |              / \               |
          |<------------     ------------->|  *race*
          |                  200(re-INV) F8|
          | ACK F7(=F4)        w/answer2   |
          |-------------     --------------|
          |              \ /               |
          |               X                |
          |              / \               |
          |<------------     ------------->|
          |         ACK (re-INV) F9        |  Est
          |------------------------------->|
          |                                |
          |                                |

   This scenario illustrates the race condition which that occurs when a UAS
   in the Moratorium state receives a re-INVITE sent by a UAC in the
   Established state.

   The UAS receives a re-INVITE (with offer2) before receiving an ACK
   for the ini-INVITE (with offer1).  The UAS sends a 200 OK (with
   answer2) to the re-INVITE (F8) because it has sent a 200 OK (with
   answer1) to the ini-INVITE (F3, F5) and the dialog has already been
   established.  (Because F5 is a retransmission of F3, SDP negotiation
   is not performed here.)

   As can be seen in Section 3.3.2 below, the 491 response seems to be
   closely related to session establishment, even in cases other than
   INVITE cross-over. crossover.  This example recommends that 200 be sent instead
   of 491 because it does not have an influence on the session.
   However, a 491 response can also lead to the same outcome, so either
   response can be used.

   Moreover, if the UAS doesn't receive an ACK for a long time, it
   should send a BYE and terminate the dialog.  Note that ACK F7 has the
   same CSeq number as ini-INVITE F1 (See (see Section 13.2.2.4 of RFC 3261
   [1]).  The UA should not reject or drop the ACK on grounds of the
   CSeq number.

   Note: Implementation issues are outside the scope of this document,
   but this note provides a the following tip is provided for avoiding race conditions of
   this type.  That is for the  The caller to can delay sending re-INVITE F6 for some period
   of time (2 seconds, perhaps), after which the caller can reasonably
   assume that its ACK has been received.  Implementors can decouple the
   actions of the user (e.g. (e.g., pressing the hold button) from the actions
   of the protocol (the sending of re-INVITE F6), so that the UA can
   behave like this.  In this case, it is the implementor's choice as to
   how long to wait.  In most cases, such an implementation may be
   useful to prevent the type of race condition shown in this section.
   This document expresses no preference about whether or not they
   should wait for an ACK to be delivered.  After considering the impact
   on users user experience, implementors should decide whether or not to wait
   for a while or not, while, because the user experience depends on the
   implementation and has no direct bearing on protocol behaviour. behavior.

   Message Details

   F1 INVITE Alice -> Bob

   INVITE sip:bob@biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Contact: <sip:alice@client.atlanta.example.com;transport=udp>
   Content-Type: application/sdp
   Content-Length: 137

   v=0
   o=alice 2890844526 2890844526 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   /* Detailed messages are shown for the sequence to illustrate the
      offer and answer examples.  */

   F2 180 Ringing Bob -> Alice

   SIP/2.0 180 Ringing
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   ;received=192.0.2.101
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Contact: <sip:bob@client.biloxi.example.com;transport=udp>
   Content-Length: 0

   F3 200 OK Bob -> Alice

   SIP/2.0 200 OK
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   ;received=192.0.2.101
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Contact: <sip:bob@client.biloxi.example.com;transport=udp>
   Content-Type: application/sdp
   Content-Length: 133

   v=0
   o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   F4 ACK Alice -> Bob

   ACK sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bKnashd8
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356

   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 ACK
   Content-Length: 0
   /* The ACK request is lost.  */

   F5(=F3) 200 OK Bob -> Alice (retransmission)

   /* The UAS retransmits a 200 OK to the ini-INVITE since it has not
      received an ACK.  */

   F6 re-INVITE Alice -> Bob

   INVITE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf91
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly

   F7(=F4) ACK Alice -> Bob (retransmission)

   /* "(=F4)" of ACK F7 shows that it is equivalent to F4 in that it is
      an ACK for F3.  This doesn't mean that F4 and F7 must be equal in
      Via-branch value.  Although it is ambiguous in RFC 3261 whether
      the Via-branch of ACK F7 differs from F4 in RFC3261, that of F4, it doesn't
      affect the UAS's behavior. */

   F8 200 OK (re-INVITE) Bob -> Alice

   SIP/2.0 200 OK
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf91
   Max-Forwards: 70

   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Length: 143
   v=0
   o=bob 2890844527 2890844528 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=recvonly

   F9 ACK (re-INVITE) Alice -> Bob

   ACK sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK230f21
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 ACK
   Content-Length: 0

3.1.5.  Callee receives Receives re-INVITE (Established state) while State) While in the
        Moratorium state (case State (Case 2)

   State  Alice                          Bob  State
          |                                |
          |    ini-INVITE (no offer) F1    |
          |------------------------------->|
     Pre  |             180 F2             |  Pre
          |<-------------------------------|
     Ear  |                                |  Ear
          |    200(ini-INV) w/offer1 F3    |
          |<-------------------------------|
    Mora  |  ACK w/answer1 F4(packet loss) |  Mora
          |-------------------->x          |
     Est  |                                |
          | re-INVITE F6      200 F5(=F3)  |
          |   w/offer2         w/offer1    |
          |-------------     --------------|
          |              \ /               |
          |               X                |
          |              / \               |
          |<------------     ------------->|
          | ACK F7(=F4)      491(re-INV) F8|
          |-------------     --------------|
          |              \ /               |
          |               X                |
          |              / \               |
          |<------------     ------------->|
          |        ACK (re-INV) F9         |  Est
          |------------------------------->|
          |                                |
          |                                |

   This scenario is basically the same as that of Section 3.1.4, but
   differs in sending an offer in the 200 and an answer in the ACK.  In
   contrast to the previous case, the offer in the 200 (F3) and the
   offer in the re-INVITE (F6) collide with each other.

   Bob sends a 491 to the re-INVITE (F6) since he is not able to
   properly handle a new request until he receives an answer.  (Note:
   500 with a Retry-After header may be returned, returned if the 491 response is
   understood to indicate request collision.  However, 491 is
   recommended here because 500 applies to so many cases that it is
   difficult to determine what the real problem was.)  The same result
   will be reached if F6 is an UPDATE with offer.

   Note: As noted in Section 3.1.4, the caller may delay sending a re-INVITE re-
   INVITE F6 for some period of time (2 seconds, perhaps), after which
   the caller may reasonably assume that its ACK has been received, to
   prevent this type of race condition.  This document expresses no
   preference about whether or not they should wait for an ACK to be
   delivered.  After considering the impact on users user experience,
   implementors should decide whether or not to wait for a while or not, while,
   because the user experience depends on the implementation and has no
   direct bearing on protocol behaviour. behavior.

   Message Details

   F1 INVITE Alice -> Bob

   INVITE sip:bob@biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Contact: <sip:alice@client.atlanta.example.com;transport=udp>
   Content-Length: 0

   /* The request does not contain an offer.  Detailed messages are
      shown for the sequence to illustrate offer and answer
      examples.  */

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   SIP/2.0 200 OK
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   ;received=192.0.2.101
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Contact: <sip:bob@client.biloxi.example.com;transport=udp>
   Content-Type: application/sdp
   Content-Length: 133

   v=0
   o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   /* An offer is made in 200.  */

   F4 ACK Alice -> Bob

   ACK sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bKnashd8
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 ACK
   Content-Type: application/sdp
   Content-Length: 137

   v=0
   o=alice 2890844526 2890844526 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   /* The request contains an answer, but the request is lost.  */

   F5(=F3) 200 OK Bob -> Alice (retransmission)

   /* The UAS retransmits a 200 OK to the ini-INVITE since it has not
      received an ACK.  */

   F6 re-INVITE Alice -> Bob

   INVITE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf91
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly

   /* The request contains an offer.  */

   F7(=F4) ACK Alice -> Bob (retransmission)

   /* A retransmission triggered by the reception of a retransmitted
      200. "(=F4)" of ACK F7 shows that it is equivalent to the F4 in
      that it is an ACK for F3.  This doesn't mean that F4 and F7 are
      necessarily equal in Via-branch value.  Although it is ambiguous
      in RFC 3261 whether the Via-branch of ACK F7 differs from F4 in RFC3261, that of
      F4, it doesn't affect the UAS's behavior.  */

   F8 491 (re-INVITE) Bob -> Alice

   /* Bob sends 491 (Request Pending), since Bob has a pending
      offer.  */

   F9 ACK (re-INVITE) Alice -> Bob

3.1.6.  Callee receives Receives BYE (Established state) while State) While in the Moratorium
        state
        State

   State  Alice                     Bob  State
          |                           |
          |         INVITE F1         |
          |-------------------------->|
     Pre  |      180 Ringing F2       |  Pre
          |<--------------------------|
     Ear  |                           |  Ear
          |         200 OK F3         |
          |<--------------------------|
    Mora  |    ACK F4(packet loss)    |  Mora
          |--------------->x          |
     Est  |   Both Way RTP Media      |
          |<=========================>|
          |   BYE F6       200 F5(=F3)|
          |-----------     -----------|
    Mort  |            \ /            |
          |             X             |
          |            / \            |
          |<----------     ---------->|  *race*
          |ACK F7(=F4)     200(BYE) F8|  Mort
          |-----------     -----------|
          |            \ /            |
          |             X             |
          |            / \            |
          |<----------     ---------->|
          | ^                       ^ |
          | | Timer K               | |
          | V                       | |
    Morg  |                 Timer J | |
          |                         V |
          |                           |  Morg
          |                           |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, BYE, while in the Moratorium state.
   An ACK request for a 200 OK response is lost (or delayed).  Bob
   retransmits the 200 OK to the ini-INVITE, and at the same time Alice
   sends a BYE request and terminates the session.  Upon receipt of the
   retransmitted 200 OK OK, Alice's UA might be inclined to reestablish the
   session.  But that is wrong - -- the session should not be
   reestablished when the dialog is in the Mortal state.  Moreover, in
   the case where the UAS sends an offer in a 200 OK, the UAS should not
   start a session again, for the same reason, if the UAS receives a
   retransmitted ACK after receiving a BYE.

   Note: As noted in Section 3.1.4, implementation issues are outside
   the scope of this document, but this note provides a the following tip is provided for
   avoiding race conditions of this type.  That is for the  The caller to can delay sending
   BYE F6 for some period of time (2 seconds, perhaps), after which the
   caller can reasonably assume that its ACK has been received.
   Implementors can decouple the actions of the user (e.g. (e.g., hanging up)
   from the actions of the protocol (the sending of BYE F6), so that the
   UA can behave like this.  In this case, it is the implementor's
   choice as to how long to wait.  In most cases, such an implementation
   may be useful to prevent the type of race condition shown in this
   section.  This document expresses no preference about whether or not
   they should wait for an ACK to be delivered.  After considering the
   impact on users user experience, implementors should decide whether or not
   to wait for a while or not, while, because the user experience depends on the
   implementation and has no direct bearing on protocol behaviour. behavior.

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   /* ACK request is lost.  */

   F5(=F3) 200 OK Bob -> Alice

   /* The UAS retransmits a 200 OK to the ini-INVITE since it has not
      received an ACK.  */

   F6 BYE Alice -> Bob

   /* Bob retransmits a 200 OK and Alice sends a BYE at the same time.
      Alice transitions to the Mortal state, so she does not begin a
      session after this even though she receives a 200 response to the
      re-INVITE.  */

   F7(=F4) ACK Alice -> Bob

   /* "(=F4)" of ACK F7 shows that it is equivalent to the F4 in that it
      is an ACK for F3.  This doesn't mean that F4 and F7 must be equal
      in Via-branch value.  Although it is ambiguous in RFC 3261 whether
      the Via-branch of ACK F7 differs from F4 in RFC3261, that of F4, it doesn't
      affect the UAS's behavior.  */
   F8 200 OK (BYE) Bob -> Alice

   /* Bob sends a 200 OK to the BYE.  */

3.2.  Receiving message Message in the Mortal State

   This section shows some examples of call flow race conditions when
   receiving messages from other states while in the Mortal state.

3.2.1.  UA receives Receives BYE (Established state) while State) While in the Mortal state State

   State  Alice                  Bob  State
          |                        |
          |       INVITE F1        |
          |----------------------->|
     Pre  |    180 Ringing F2      |  Pre
          |<-----------------------|
     Ear  |                        |  Ear
          |       200 OK F3        |
          |<-----------------------|
    Mora  |         ACK F4         |  Mora
          |----------------------->|
     Est  |   Both Way RTP Media   |  Est
          |<======================>|
          |                        |
          | BYE F5         BYE F6  |
          |---------     ----------|
    Mort  |          \ /           |  Mort
          |           X            |
          |          / \           |
          |<--------     --------->|  *race*
          |                        |
          | 200 F8         200 F7  |
          |---------     ----------|
          |          \ /           |
          |           X            |
          |          / \           |
          |<--------     --------->|
          | ^                    ^ |
          | | Timer K            | |
          | V                    | |
    Morg  |              Timer J | |
          |                      V |
          |                        |  Morg
          |                        |
   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, BYE, while in the Mortal state.
   Alice and Bob send a BYE at the same time.  A dialog and session are
   ended shortly after a BYE request is passed to a client transaction.
   As shown in Section 2, the UA remains in the Mortal state.

   UAs in the Mortal state return error responses to the requests that
   operate within a dialog or session, such as re-INVITE, UPDATE, or
   REFER.  However, the UA shall return a 200 OK to the BYE taking the
   use case into consideration where a caller and a callee exchange
   reports about the session when it is being terminated.  (Since the dialogue
   dialog and the session both terminate when a BYE is sent, the choice
   of sending a 200 or an error response upon receiving a BYE while in
   the Mortal state does not affect the resulting termination.
   Therefore, even though this example uses a 200 response, other
   responses can also be used.)

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 BYE Alice -> Bob

   /* The session is terminated at the moment Alice sends a BYE.  The
      dialog still exists then, but it is certain to be terminated in a
      short period of time.  The dialog is completely terminated when
      the timeout of the BYE request occurs.  */

   F6 BYE Bob -> Alice

   /* Bob has also transmitted a BYE simultaneously with Alice.  Bob
      terminates the session and the dialog.  */

   F7 200 OK Bob -> Alice

   /* Since the dialog is in the Moratorium state, Bob responds with a
      200 to the BYE request.  */
   F8 200 OK Alice -> Bob

   /* Since Alice has transitioned from the Established state to the
      Mortal state by sending a BYE, Alice responds with a 200 to the
      BYE request.  */

3.2.2.  UA receives Receives re-INVITE (Established state) while State) While in the Mortal
        state
        State

    State  Alice                  Bob  State
           |                        |
           |       INVITE F1        |
           |----------------------->|
      Pre  |    180 Ringing F2      |  Pre
           |<-----------------------|
      Ear  |                        |  Ear
           |       200 OK F3        |
           |<-----------------------|
     Mora  |         ACK F4         |  Mora
           |----------------------->|
      Est  |   Both Way RTP Media   |  Est
           |<======================>|
           |                        |
           | BYE F5     re-INVITE F6|
           |---------     ----------|
     Mort  |          \ /           |
           |           X            |
           |          / \           |
   *race*  |<--------     --------->|
           |                        |  Mort
           | 481 F8         200 F7  |
           | (re-INV)       (BYE)   |
           |---------     ----------|
           |          \ /           |^
           |           X            ||
           |          / \           ||Timer J
           |<--------     --------->||
          ^|    ACK (re-INV) F9     ||
          ||<-----------------------||
   Timer K||                        ||
          V|                        ||
     Morg  |                        |V
           |                        |  Morg
           |                        |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, re-INVITE, while in the Mortal
   state.  Bob sends a re-INVITE, and Alice sends a BYE at the same
   time.  The re-INVITE receives a 481 response, response since the TU of Alice
   has transitioned from the Established state to the Mortal state by
   sending BYE.  Bob sends an ACK for the 481 response, response because the ACK
   for error responses is handled by the transaction layer and and, at the
   point of receiving the 481 481, the INVITE client transaction still
   remains (even though the dialog has been terminated).

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 BYE Alice -> Bob

   /* Alice sends a BYE and terminates the session, and transitions from
      the Established state to the Mortal state.  */

   F6 re-INVITE Bob -> Alice

   /* Alice sends a BYE, and Bob sends a re-INVITE at the same time.
      The dialog state transitions to the Mortal state at the moment
      Alice sends the BYE, but Bob does not know this until he receives
      the BYE.  Therefore, the dialog is in the Terminated state from
      Alice's point of view, but in the Confirmed state from Bob's point
      of view.  A race condition occurs.  */

   F7 200 OK (BYE) Bob -> Alice

   F8 481 Call/Transaction Does Not Exist (re-INVITE) Alice -> Bob

   /* Since Alice is in the Mortal state, she responds with a 481 to the
      re-INVITE.  */

   F9 ACK (re-INVITE) Bob -> Alice

   /* ACK for an error response is handled by Bob's INVITE client
      transaction.  */

3.2.3.  UA receives Receives 200 OK for re-INVITE (Established state) while State) While in
        the Mortal state State

   State  Alice                  Bob  State
          |                        |
          |       INVITE F1        |
          |----------------------->|
     Pre  |    180 Ringing F2      |  Pre
          |<-----------------------|
     Ear  |                        |  Ear
          |       200 OK F3        |
          |<-----------------------|
    Mora  |         ACK F4         |  Mora
          |----------------------->|
     Est  |   Both Way RTP Media   |  Est
          |<======================>|
          |                        |
          |      re-INVITE F5      |
          |<-----------------------|
          | 200 F7         BYE F6  |
          |---------     ----------|
          |          \ /           |  Mort
          |           X            |
          |          / \           |
          |<--------     --------->|  *race*
    Mort  | 200 F8         ACK F9  |
          | (BYE)         (re-INV) |
          |---------     ----------|
          | ^        \ /           |
          | |         X            |
          | |        / \           |
          |<--------     --------->|
          | |                    ^ |
          | |            Timer K | |
          | |                    V |
          | | Timer J              |  Morg
          | V                      |
    Morg  |                        |
          |                        |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, 200 to a re-INVITE, while in the
   Mortal state.  Bob sends a BYE immediately after sending a re-INVITE.
   (For example, in the case of a telephone application, it is possible
   that a user hangs up the phone immediately after refreshing the
   session.)  Bob sends an ACK for a 200 response to INVITE while in the
   Mortal state, completing the INVITE transaction.

   Note: As noted in Section 3.1.4, implementation issues are outside
   the scope of this document, but this note provides a the following tip is provided for
   avoiding race conditions of this type.  That is for the  The UAC to can delay sending a
   BYE F6 until the re-INVITE transaction F5 completes.  Implementors
   can decouple the actions of the user (e.g. (e.g., hanging up) from the
   actions of the protocol (the sending of BYE F6), so that the UA can
   behave like this.  In this case, it is the implementor's choice as to
   how long to wait.  In most cases, such an implementation may be
   useful in preventing the type of race condition described in this
   section.  This document expresses no preference about whether or not
   they should wait for an ACK to be delivered.  After considering the
   impact on users user experience, implementors should decide whether or not
   to wait for a while or not, while, because the user experience depends on the
   implementation and has no direct bearing on protocol behaviour. behavior.

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 re-INVITE Bob -> Alice

   INVITE sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bKnashd7
   Session-Expires: 300;refresher=uac
   Supported: timer
   Max-Forwards: 70
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Content-Length: 0

   /* Some detailed messages are shown for the sequence to illustrate
      that the re-INVITE is handled in the usual manner in the Mortal
      state.  */

   F6 BYE Bob -> Alice

   /* Bob sends BYE immediately after sending the re-INVITE.  Bob
      terminates the session and transitions from the Established state
      to the Mortal state.  */
   F7 200 OK (re-INVITE) Alice -> Bob

   SIP/2.0 200 OK
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bKnashd7
   ;received=192.0.2.201
   Require: timer
   Session-Expires: 300;refresher=uac
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Content-Length: 0

   /* Bob sends BYE, and Alice responds with a 200 OK to the re-INVITE.
      A race condition occurs.  */

   F8 200 OK (BYE) Alice -> Bob

   F9 ACK (re-INVITE) Bob -> Alice

   ACK sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bK74b44
   Max-Forwards: 70
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 ACK
   Content-Length: 0

   /* Bob sends ACK in the Mortal state to complete the three-way
      handshake of the INVITE transaction.  */

3.2.4.  Callee receives Receives ACK (Moratorium state) while State) While in the Mortal state State

   State  Alice                          Bob  State
          |                                |
          |         ini-INVITE F1          |
          |------------------------------->|
     Pre  |            180 F2              |  Pre
          |<-------------------------------|
     Ear  |            200 F3              |  Ear
          |<-------------------------------|
    Mora  |                                |  Mora
          |    ACK F4            BYE F5    |
          |-------------     --------------|
     Est  |              \ /               |  Mort
          |               X                |
          |              / \               |
          |<------------     ------------->|  *race*
    Mort  |            200 F6              |
          |------------------------------->|
          | ^                            ^ |
          | |                    Timer K | |
          | |                            V |
          | | Timer J                      |  Morg
          | V                              |
    Morg  |                                |
          |                                |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, ACK to 200, while in the Mortal
   state.  Alice sends an ACK and Bob sends a BYE at the same time.
   When the offer is in a 2xx, and the answer is in an ACK, there is a
   race condition.  A session is not started when the ACK is received
   because Bob has already terminated the session by sending a BYE.  The
   answer in the ACK request is just ignored.

   Note: As noted in Section 3.1.4, implementation issues are outside
   the scope of this document, but this note provides a the following tip is provided for
   avoiding race conditions of this type.  Implementors can decouple the
   actions of the user (e.g. (e.g., hanging up) from the actions of the
   protocol (the sending of BYE F5), so that the UA can behave like
   this.  In this case, it is the implementor's choice as to how long to
   wait.  In most cases, such an implementation may be useful in
   preventing the type of race condition described in this section.
   This document expresses no preference about whether or not they
   should wait for an ACK to be delivered.  After considering the impact
   on users user experience, implementors should decide whether or not to wait
   for a while or not, while, because the user experience depends on the
   implementation and has no direct bearing on protocol behaviour. behavior.

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   /* RTP streams are established between Alice and Bob Bob.  */

   F5 BYE Alice -> Bob

   F6 200 OK Bob -> Alice

   /* Alice sends a BYE and terminates the session and dialog.  */

3.3.  Other race conditions Race Conditions

   This section shows examples of race conditions that are not directly
   related to dialog state transition.  In SIP, processing functions are
   deployed in three layers, layers: dialog, session, and transaction.  They are
   related to each other, but have to be treated separately.  Section 17
   of RFC 3261 [1] details the processing of transactions.  This draft
   document has tried so far to clarify the processing on dialogs.  This
   section explains race conditions which that are related to sessions
   established with SIP.

3.3.1.  Re-INVITE crossover Crossover

   Alice                         Bob
     |                            |
     |         INVITE F1          |
     |--------------------------->|
     |      180 Ringing F2        |
     |<---------------------------|
     |          200 OK F3         |
     |<---------------------------|
     |           ACK F4           |
     |--------------------------->|
     |     Both Way RTP Media     |
     |<==========================>|
     |                            |
     |re-INVITE F5   re-INVITE F6 |
     |------------   -------------|
     |            \ /             |
     |             X              |
     |            / \             |
     |<-----------   ------------>|
     |   491 F8        491 F7     |
     |------------   -------------|
     |            \ /             |
     |             X              |
     |            / \             |
     |<-----------   ------------>|
     |  ^ ACK F9         ^ ACK F10|
     |--|---------   ----|--------|
     |  |          \ /   |        |
     |  |           X    |        |
     |  |          / \   |        |
     |<-|----------   ---|------->|
     |  |                |        |
     |  |0-2.0 sec       |        |
     |  |                |        |
     |  v  re-INVITE F11(=F6)     |
     |<------------------|--------|
     |     200 OK F12    |        |
     |-------------------|------->|
     |       ACK F13     |        |
     |<------------------|--------|
     |                   |        |
     |                   |2.1-4.0 sec
     |                   |        |
     |re-INVITE F14(=F5) v        |
     |--------------------------->|
     |         200 OK F15         |
     |<---------------------------|
     |          ACK F16           |
     |--------------------------->|
     |                            |
     |                            |

   In this scenario, Alice and Bob send re-INVITE re-INVITEs at the same time.
   When two re-INVITEs cross in the same dialog, they are retried, each
   after a different interval, according to Section 14.1, 14.1 of RFC 3261
   [1].  When Alice sends the re-INVITE and it crosses with Bob's, the
   re-INVITE will be retried after 2.1-4.0 seconds because she owns the
   Call-ID (she generated it).  Bob will retry his INVITE again after
   0.0-2.0 seconds, because Bob isn't the owner of the Call-ID.

   Therefore, each user agent User Agent must remember whether or not it has
   generated the Call-ID of the dialog or not, dialog, in case an INVITE may cross with
   another INVITE.

   In this example, Alice's re-INVITE is for session modification and
   Bob's re-INVITE is for session refresh.  In this case, after the 491
   responses, Bob retries the re-INVITE for session refresh earlier than
   Alice.  If Alice was to retry her re-INVITE (that is, if she was not
   the owner of Call-ID), the request would refresh and modify the
   session at the same time.  Then Bob would know that he would does not need
   to retry his re-INVITE to refresh the session.

   In another instance instance, where two re-INVITEs for session modification, modification
   cross over, retrying the same re-INVITE again after a 491 by the
   Call-ID owner (the UA which that retries its re-INVITE after the other UA)
   may result in unintended behavior, so the UA must decide if the retry
   of the re-INVITE is necessary.  (For example, when a call hold and an
   addition of video media cross over, mere retry of the re-INVITE at
   the firing of the timer may result in the situation where the video
   is transmitted immediately after the holding of the audio.  This
   behavior is probably not intended by the users.)

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 re-INVITE Alice -> Bob

   INVITE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly
   /* Some detailed messages are shown for the sequence to illustrate
      what sort of INVITE requests crossed over each other.  */

   F6 re-INVITE Bob -> Alice

   INVITE sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bKnashd7
   Session-Expires: 300;refresher=uac
   Supported: timer
   Max-Forwards: 70
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Content-Length: 0

   /* A re-INVITE request for a session refresh and another for a call
      hold are sent at the same time.  */

   F7 491 Request Pending Bob -> Alice

   /* Since a re-INVITE is in progress, a 491 response is returned.  */

   F8 491 Request Pending Alice -> Bob

   F9 ACK (INVITE) Alice -> Bob

   F10 ACK (INVITE) Bob -> Alice

   F11 re-INVITE Bob -> Alice

   INVITE sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bKnashd71

   Session-Expires: 300;refresher=uac
   Supported: timer
   Max-Forwards: 70
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Type: application/sdp
   Content-Length: 133

   v=0
   o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   /* Since Bob is not the owner of the Call-ID, he sends a re-INVITE
      again after 0.0-2.0 seconds.  */

   F12 200 OK Alice -> Bob

   F13 ACK Bob -> Alice

   F14 re-INVITE Alice -> Bob

   INVITE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf91
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 3 INVITE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly

   /* Since Alice is the owner of the Call-ID, Alice sends a re-INVITE
      again after 2.1-4.0 seconds.  */

   F15 200 OK Bob -> Alice

   F16 ACK Alice -> Bob

3.3.2.  UPDATE and re-INVITE crossover Crossover

   Alice                         Bob
     |                            |
     |         INVITE F1          |
     |--------------------------->|
     |      180 Ringing F2        |
     |<---------------------------|
     |                            |
     |          200 OK F3         |
     |<---------------------------|
     |           ACK F4           |
     |--------------------------->|
     |     Both Way RTP Media     |
     |<==========================>|
     |                            |
     |  UPDATE F5    re-INVITE F6 |
     |------------   -------------|
     |            \ /             |
     |             X              |
     |            / \             |
     |<-----------   ------------>|
     |   491 F8        491 F7     |
     |   (re-INVITE)   (UPDATE)   |
     |------------   -------------|
     |            \ /             |
     |             X              |
     |            / \             |
     |<-----------   ------------>|
     |  ^       ACK F9   ^        |
     |<-|----------------|--------|
     |  |                |        |
     |  |0-2.0 sec       |        |
     |  |                |        |
     |  v  re-INVITE F10 |        |
     |<------------------|--------|
     |     200 OK F11    |        |
     |-------------------|------->|
     |       ACK F12     |        |
     |<------------------|--------|
     |                   |        |
     |                   |2.1-4.0 sec
     |                   |        |
     |      UPDATE F13   v        |
     |--------------------------->|
     |         200 OK F14         |
     |<---------------------------|
     |                            |
     |                            |

   In this scenario, the UPDATE contains an SDP offer, therefore offer; therefore, the
   UPDATE and re-INVITE are both responded to with 491 as in the case of
   "re-INVITE crossover".  When an UPDATE for session refresh which that
   doesn't contain a session description and a re-INVITE cross each
   other, both requests succeed with 200 (491 means that a UA has a
   pending request).  The same is true for UPDATE crossover.  In the
   former case where either UPDATE contains a session description description, the
   requests fail with 491, and 491; in the latter cases cases, they succeed with 200.

   Note: A 491 response is sent because an SDP offer is pending, and 491
   is an error which that is related to matters that impact the session
   established by SIP.

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 UPDATE Alice -> Bob

   UPDATE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf9
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 UPDATE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly

   /* Some detailed messages are shown for the sequence to illustrate
      messages crossing over each other.  */

   F6 re-INVITE Bob -> Alice

   INVITE sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bKnashd7
   Session-Expires: 300;refresher=uac
   Supported: timer
   Max-Forwards: 70
   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 1 INVITE
   Content-Type: application/sdp
   Content-Length: 133

   v=0
   o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   /* A This is a case where a re-INVITE for a session refresh and a an
      UPDATE for a call hold are sent at the same time.  */

   F7 491 Request Pending (UPDATE) Bob -> Alice

   /* Since a re-INVITE is in process, a 491 response is returned.  */

   F8 491 Request Pending (re-INVITE) Alice -> Bob

   F9 ACK (re-INVITE) Alice -> Bob

   F10 re-INVITE Bob -> Alice

   INVITE sip:alice@client.atlanta.example.com SIP/2.0
   Via: SIP/2.0/UDP client.biloxi.example.com:5060;branch=z9hG4bKnashd71
   Session-Expires: 300;refresher=uac
   Supported: timer
   Max-Forwards: 70

   From: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   To: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 2 INVITE
   Content-Type: application/sdp
   Content-Length: 133

   v=0
   o=bob 2890844527 2890844527 IN IP4 client.biloxi.example.com
   s=-
   c=IN IP4 192.0.2.201
   t=0 0
   m=audio 3456 RTP/AVP 0
   a=rtpmap:0 PCMU/8000

   /* Since Bob is not the owner of the Call-ID, Bob sends an INVITE
      again after 0.0-2.0 seconds.  */
   F11 200 OK Alice -> Bob

   F12 ACK Bob -> Alice

   F13 UPDATE Alice -> Bob

   UPDATE sip:sip:bob@client.biloxi.example.com SIP/2.0
   Via: SIP/2.0/UDP client.atlanta.example.com:5060;branch=z9hG4bK74bf91
   Max-Forwards: 70
   From: Alice <sip:alice@atlanta.example.com>;tag=9fxced76sl
   To: Bob <sip:bob@biloxi.example.com>;tag=8321234356
   Call-ID: 3848276298220188511@atlanta.example.com
   CSeq: 3 UPDATE
   Content-Length: 147

   v=0
   o=alice 2890844526 2890844527 IN IP4 client.atlanta.example.com
   s=-
   c=IN IP4 192.0.2.101
   t=0 0
   m=audio 49172 RTP/AVP 0
   a=rtpmap:0 PCMU/8000
   a=sendonly
   /* Since Alice is the owner of the Call-ID, Alice sends the UPDATE
      again after 2.1-4.0 seconds.  */

   F14 200 OK Bob -> Alice

3.3.3.  Receiving REFER (Established state) while State) While in the Mortal state State

    State  Alice                  Bob  State
           |                        |
           |       INVITE F1        |
           |----------------------->|
      Pre  |    180 Ringing F2      |  Pre
           |<-----------------------|
      Ear  |                        |  Ear
           |       200 OK F3        |
           |<-----------------------|
     Mora  |         ACK F4         |  Mora
           |----------------------->|
      Est  |   Both Way RTP Media   |  Est
           |<======================>|
           |                        |
           | BYE F5        REFER F6 |
           |---------     ----------|
     Mort  |          \ /           |
           |           X            |
           |          / \           |
   *race*  |<--------     --------->|
           |                        |  Mort
           | 481 F8         200 F7  |
           | (REFER)        (BYE)   |
           |---------     ----------|
           |          \ /         ^ |
           |           X          | |
           |          / \         | |
           |<--------     --------->|
           | ^                    | |
           | | Timer K            | |
           | V            Timer J | |
     Morg  |                      V |
           |                        |  Morg
           |                        |

   This scenario illustrates the race condition which that occurs when the UAS
   receives an Established message, REFER, while in the Mortal state.
   Bob sends a REFER, and Alice sends a BYE at the same time.  Bob sends
   the REFER in the same dialog.  Alice's dialog state moves to the
   Mortal state at the point of sending BYE.  In the Mortal state, the
   UA possesses dialog information for an internal process but the
   dialog shouldn't exist outwardly.  Therefore, the UA sends an error
   response to the REFER, which is transmitted as a mid-dialog request.
   So Alice, in the Mortal state, sends an error response to the REFER.
   However, Bob has already started the SUBSCRIBE usage with REFER, so
   the dialog continues until the SUBSCRIBE usage terminates, even
   though the INVITE dialog usage terminates by receiving BYE.  Bob's
   behavior in this case needs to follow the procedures in RFC 5057 [6].

   Message Details

   F1 INVITE Alice -> Bob

   F2 180 Ringing Bob -> Alice

   F3 200 OK Bob -> Alice

   F4 ACK Alice -> Bob

   F5 BYE Alice -> Bob

   /* Alice sends a BYE request and terminates the session, and
      transitions from the Confirmed state to the Terminated state.  */

   F6 REFER Bob -> Alice

   /* Alice sends a BYE, and Bob sends a REFER at the same time.  Bob
      sends the REFER on the INVITE dialog.  The dialog state
      transitions to the Mortal state at the moment Alice sends the BYE,
      but Bob doesn't know this until he receives the BYE.  A race
      condition occurs.  */

   F7 200 OK (BYE) Bob -> Alice

   F8 481 Call/Transaction Does Not Exist (REFER) Alice -> Bob

   /* Alice in the Mortal state sends a 481 to the REFER.  */

4.  IANA Considerations

   This document has no actions for IANA.

5.  Security Considerations

   This document contains clarifications of behavior specified in RFC
   3261 [1], RFC 3264 [2] [2], and RFC 3515 [4].  The security
   considerations of those documents continue to apply after the
   application of these clarifications.

6.

5.  Acknowledgements

   The authors would like to thank Robert Sparks, Dean Willis, Cullen
   Jennings, James M. Polk, Gonzalo Camarillo, Kenichi Ogami, Akihiro
   Shimizu, Mayumi Munakata, Yasunori Inagaki, Tadaatsu Kidokoro,
   Kenichi Hiragi, Dale Worley, Vijay K. Gurbani Gurbani, and Anders Kristensen
   for their comments on this document.

7.

6.  References

7.1.

6.1.  Normative References

   [1]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
        Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP:
        Session Initiation Protocol", RFC 3261, June 2002.

   [2]  Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with
        Session Description Protocol (SDP)", RFC 3264, June 2002.

   [3]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

   [4]  Sparks, R., "The Session Initiation Protocol (SIP) Refer
        Method", RFC 3515, April 2003.

   [5]  Rosenberg, J. and H. Schulzrinne, "Reliability of Provisional
        Responses in Session Initiation Protocol (SIP)", RFC 3262,
        June 2002.

7.2.

6.2.  Informative References

   [6]  Sparks, R., "Multiple Dialog Usages in the Session Initiation
        Protocol", RFC 5057, November 2007.

   [7]  Sparks, R., "Correct transaction handling for 200 responses to
        Session Initiation Protocol INVITE requests",
        draft-sparks-sip-invfix-02 (work Work in progress), Progress,
        July 2008.

Appendix A.  BYE in the Early Dialog

   This section, related to Section 3.1.3, explains why BYE is not
   recommended in the Early state, illustrating a case in which a BYE in
   the early dialog triggers confusion.

   Alice            Proxy               Bob   Carol
     |                |                  |      |
     |   INVITE F1    |                  |      |
     |--------------->|    INVITE F2     |      |
     |     100 F3     |----------------->|      |
     |<---------------| 180(To tag=A) F4 |      |
     |    180(A) F5   |<-----------------|      |
     |<---------------|                  |      |
     |                |       INVITE(Fork) F6   |
     |                |------------------------>|
     |                |                100 F7   |
     |    BYE(A) F8   |<------------------------|
     |--------------->|    BYE(A) F9     |      |
     |                |----------------->|      |
     |                |  200(A,BYE) F10  |      |
     | 200(A,BYE) F11 |<-----------------|      |
     |<---------------|  487(A,INV) F12  |      |
     |                |<-----------------|      |
     |                |    ACK(A) F13    |      |
     |                |----------------->|      |
     |                |                  |      |
     |                |                         |
     |                |     200(To tag=B) F13   |
     |   200(B) F14   |<------------------------|
     |<---------------|                         |
     |   ACK(B) F15   |                         |
     |--------------->|            ACK(B) F16   |
     |                |------------------------>|
     |   BYE(B) F17   |                         |
     |--------------->|            BYE(B) F18   |
     |                |------------------------>|
     |                |            200(B) F19   |
     |   200(B) F20   |<------------------------|
     |<---------------|                         |
     |                |                         |
     |                |                         |

   Care is advised in sending BYE in the Early state when forking by a
   proxy is expected.  In this example, the BYE request progresses
   normally, and it succeeds in correctly terminating the dialog with
   Bob.  After Bob terminates the dialog by receiving the BYE, he sends
   a 487 to the ini-INVITE.  According to Section 15.1.2 of RFC 3261
   [1], it is RECOMMENDED for the UAS to generate a 487 to any pending
   requests after receiving a BYE.  In the this example, Bob sends a 487 to
   the ini-INVITE since he receives the BYE while the ini-INVITE is in
   pending state.

   However, Alice receives a final response to the INVITE (a 200 from
   Carol) even though she has successfully terminated the dialog with
   Bob.  This means that, regardless of the success/failure of the BYE
   in the Early state, Alice MUST be prepared for the establishment of a
   new dialog until receiving the final response for the INVITE and
   terminating the INVITE transaction.

   It is not illegal to send a BYE in the Early state to terminate a
   specific early dialog - -- it may satisfy the intent of some callers.
   However, the choice of BYE or CANCEL in the Early state must be made
   carefully.  CANCEL is appropriate when the goal is to abandon the
   call attempt entirely.  BYE is appropriate when the goal is to
   abandon a particular early dialog while allowing the call to be
   completed with other destinations.  When using either BYE or CANCEL CANCEL,
   the UAC must be prepared for the possibility that a call may still be
   established to one (or more) or more destinations.

Appendix B.  BYE request overlapping Request Overlapping with re-INVITE

     UAC                    UAS
      |                      |
   The session has been already established
     ==========================
      |   re-INVITE F1       |
      |--------------------->|
      |   BYE F2             |
      |--------------------->|
      |   200(BYE) F3        |
      |<---------------------|
      |   INVITE F4(=F1)     |
      |--------------------->|
      |                      |
      |                      |

   This case could look similar to the one in Section 3.2.3.  However,
   it is not a race condition.  This case describes the behavior when
   there is no response to the INVITE for some reason.  The appendix
   explains the behavior in this case and its rationale, since this case
   is likely to cause confusion.

   First of all, it is important not to confuse the behavior of the
   transaction layer and that of the dialog layer.  RFC 3261 [1] details
   the transaction layer behavior.  The dialog layer behavior is
   explained in this document.  It has to be noted that these two
   behaviors are independent of each other, even though both layers may
   be triggered to change their states by sending or receiving the same
   SIP messages.  (A dialog can be terminated even though a transaction
   still remains, and vice versa.)

   In the sequence above, there is no response to F1, and F2 (BYE) is
   sent immediately after F1 F1.  (F1 is a mid-dialog request.  If F1 was
   an ini-INVITE, BYE could not be sent before the UAC received a
   provisional response to the request with a To tag). tag.)

   Below is a figure which that illustrates the UAC's dialog state and the
   transaction state.

   BYE   INV  dialog UAC                    UAS
                :     |                      |
                :     |                      |
                |     |   re-INVITE F1       |
          o     |     |--------------------->|
          |     |     |   BYE F2             |
    o     |  (Mortal) |--------------------->|
    |     |     |     |   200(BYE) F3        |
    |     |     |     |<---------------------|
    |     |     |     |   INVITE F4(=F1)     |
    |     |     |     |--------------------->|
    |     |     |     |   481(INV) F5        |
    |     |     |     |<---------------------|
    |     |     |     |   ACK(INV) F6        |
    |     |     |     |--------------------->|
    |     |     |     |                      |
    o     |     o     |                      |
          |           |                      |
          o           |                      |
                      |                      |

   For the UAC, the INVITE client transaction begins at the point F1 is
   sent.  The UAC sends BYE (F2) immediately after F1.  This is a
   legitimate behavior.  (Usually  (Usually, the usage of each SIP method is
   independent, for BYE and others.  However, it should be noted that it
   is prohibited to send a request with an SDP offer while the previous
   offer is in progress.)

   After that, F2 triggers the BYE client transaction.  At the same
   time, the dialog state transitions to the Mortal state and then only
   a BYE or a response to a BYE can be handled.

   It is permitted to send F4 (a retransmission of INVITE) in the Mortal
   state,
   state because the retransmission of F1 is handled by the transaction
   layer, and the INVITE transaction has not yet transitioned to the
   Terminated state.  As is mentioned above, the dialog and the
   transaction behave independently each other.  Therefore  Therefore, the
   transaction handling has to be continued even though the dialog has
   moved to the Terminated state.

   Note: As noted in Section 3.1.4, implementation issues are outside
   the scope of this document, but this note provides a the following tip is provided for
   avoiding race conditions of this type.  That is for the  The UAC to can delay sending BYE
   F2 until the re-INVITE transaction F1 completes.  Implementors can
   decouple the actions of the user (e.g. (e.g., hanging up) from the actions
   of the protocol (the sending of BYE F2), so that the UA can behave
   like this.  In this case, it is the implementor's choice as to how
   long to wait.  In most cases, such an implementation may be useful to
   prevent this case.  This document expresses no preference about
   whether or not they should wait for an ACK to be delivered.  After
   considering the impact on users user experience, implementors should decide
   whether or not to wait for a while or not, while, because the user experience
   depends on the implementation and has no direct bearing on protocol behaviour.
   behavior.

   Next, the UAS's state is shown below.

   UAC                    UAS dialog  INV   BYE
    |                      |     :
    |                      |     :
    |   re-INVITE F1       |     |
    |-------------->x      |     |
    |   BYE F2             |     |
    |--------------------->|     |           o
    |   200(BYE) F3        |  (Mortal)       |
    |<---------------------|     |           |<-Start Timer J
    |   INVITE F4(=F1)     |     |           |
    |--------------------->|     |     o     |
    |   4xx/5xx(INV) F5    |     o     |     o
    |<---------------------|           |
    |   ACK(INV) F6        |           |
    |--------------------->|           |<-Start Timer I
    |                      |           |
    |                      |           |
    |                      |           o
    |                      |

   For the UAS, it can be considered that packet the F1 is lost or delayed (here
   (here, the behavior is explained for the case that the UAS receives
   F2 BYE before F1 INVITE).  Therefore, F2 triggers the BYE transaction
   for the UAS, and simultaneously the dialog moves to the Mortal state.
   Then, upon the reception of F4 F4, the INVITE server transaction begins.
   (It is permitted to start the INVITE server transaction in the Mortal
   state.  The INVITE server transaction begins to handle the received
   SIP request regardless of the dialog state.)  The UAS's TU sends an
   appropriate error response for the F4 INVITE, either 481 (because the
   TU knows that the dialog which that matches the INVITE is in the Terminated
   state) or 500 (because the re-sent F4 has an out-of-order CSeq).  (It
   is mentioned above that INVITE message F4 (and F1) is a mid-dialog
   request.  Mid-dialog requests have a To tag.  It should be noted that
   the UAS's TU does not begin a new dialog upon the reception of INVITE
   with a To tag.)

Appendix C.  UA's behavior Behavior for CANCEL

   This section explains the CANCEL behaviors which that indirectly impact the
   dialog state transition in the Early state.  CANCEL does not have any
   influence on the UAC's dialog state.  However, the request has a an
   indirect influence on the dialog state transition because it has a
   significant effect on ini-INVITE.  For the UAS UAS, the CANCEL request
   has more direct effects on the dialog than on the sending of a CANCEL
   by the UAC, because it can be a trigger to send the 487 response.
   Figure 3 explains the UAS's behavior in the Early state.  This flow
   diagram is only an explanatory figure, and the actual dialog state
   transition is as illustrated in Figures 1 and 2.

   In the flow, full lines are related to dialog state transition, and
   dotted lines are involved with CANCEL. (r) represents the reception
   of signaling, and (s) means sending.  There is no dialog state for
   CANCEL, but here the Cancelled state is handled virtually just for
   the ease of understanding of the UA's behavior when it sends and
   receives CANCEL.

                  +-------------+
                  | Preparative |---+
                  +-------------+   |
                    :   | 1xx(s)    |
                    :   V           |
                    : +-------+     | 2xx(s)
                    : | Early |-----+------+
                    : +-------+            |
                    :     :                V
                    :     :           +-----------+
                    :     :           | Confirmed |<...
                    :.....:           +-----------+   :
                       :                   |  :       :
                       :             BYE(r)|  :       :
                       : CANCEL(r)         |  :.......:
                       V                   |    CANCEL(r)
                   .............           |
                   : Cancelled :           |
                   :...........:           |
                      | 487(s)             |
                      |                    |
                      +--------------------+
                                 |
                                 V
                           +------------+
                           | Terminated |
                           +------------+

                   Figure 3: CANCEL flow diagram for UAS

   There are two behaviors for the UAS depending on the state when it
   receives a CANCEL.

   The first behavior is when the UAS receives a CANCEL in the Early
   state.  In this case case, the UAS immediately sends a 487 for the INVITE,
   and the dialog transitions to the Terminated state.

   The other is the case in which the UAS receives a CANCEL while in the
   Confirmed state.  In this case case, the dialog state transition does not
   occur
   occur, because the UAS has already sent a final response to the
   INVITE to which the CANCEL is targeted.  (Note that, because of the
   UAC's behavior, a UAS that receives a CANCEL in the Confirmed state
   can expect to receive a BYE immediately and move to the Terminated
   state.  However, the UAS's state does not transition until it
   actually receives a BYE.)

Appendix D.  Notes on the request Request in the Mortal state State

   This section describes the UA's behavior in the Mortal state, which
   needs careful attention.  Note that every transaction completes
   independently of others, following the principle of RFC 3261 [1].

   In the Mortal state, only a BYE can be accepted, and the other
   messages in the INVITE dialog usage are responded to with an error.
   However, sending of ACK and the authentication procedure for BYE are
   conducted in this state.  (The handling of messages concerning
   multiple dialog usages is out of the scope of this document.  Refer
   to RFC 5057 [6] for further information.)

   ACK for error responses is handled by the transaction layer, so the
   handling is not related to the dialog state.  Unlike the ACK for
   error responses, ACK for 2xx responses is a request newly generated
   by a TU.  However, the ACK for 2xx and the ACK for error responses
   are both a part of the INVITE transaction, even though their handling
   differs (Section 17.1.1.1, RFC 3261 [1]).  Therefore, the INVITE
   transaction is completed by the three-way handshake, which includes
   ACK, even in the Mortal state.

   Considering actual implementation, the UA needs to keep the INVITE
   dialog usage until the Mortal state finishes, so that it is able to
   send ACK for a 2xx response in the Mortal state.  If a 2xx to INVITE
   is received in the Mortal state, the duration of the INVITE dialog
   usage will be extended to 64*T1 seconds after the receiving receipt of the 2xx,
   to cope with the possible 2xx retransmission.  (The duration of the
   2xx retransmission is 64*T1, so the UA needs to be prepared to handle
   the retransmission for this duration.)  However, the UA shall send an
   error response to other requests, since the INVITE dialog usage in
   the Mortal state is kept only for the sending of ACK for 2xx.

   The BYE authentication procedure shall be processed in the Mortal
   state.  When authentication is requested by a 401 or 407 response,
   the UAC resends BYE with appropriate credentials.  Also  Also, the UAS
   handles the retransmission of the BYE for which it requested
   authentication.

Appendix E.  Forking and receiving new Receiving New To tags Tags

   This section details the behavior of the TU when it receives multiple
   responses with a different To tag tags to the ini-INVITE.

   When an INVITE is forked inside a SIP network, there is a possibility
   that the TU receives multiple responses to the ini-INVITE with
   differing To tags (See Section (see Sections 12.1, 13.1, 13.2.2.4, 16.7, 19.3, etc.
   etc., of RFC 3261 [1]).  If the TU receives multiple 1xx responses
   with different To tags, the original DSM forks and a new DSM instance
   is created.  As a consequence consequence, multiple early dialogs are generated.

   If one of the multiple early dialogs receives a 2xx response, it
   naturally transitions to the Confirmed state.  No DSM state
   transition occurs for the other early dialogs, and their sessions
   (early media) terminate.  The TU of the UAC terminates the INVITE
   transaction after 64*T1 seconds seconds, starting at the point of receiving
   the first 2xx response.  Moreover, all mortal early dialogs which that do
   not transition to the Established state are terminated (See (see Section
   13.2.2.4 of RFC 3261 [1]).  By "mortal early dialog" dialog", we mean any
   early dialog that the UA will terminate when another early dialog is
   confirmed.

   Below is an example sequence in which two 180 responses with
   different To tags are received, and then a 200 response for one of
   the early dialogs (dialog A) is received.  Dotted lines (..) in the
   sequences are auxiliary lines to represent the influence on dialog B.

                                   UAC
                    dialog(A)       |    INVITE F1
                     Pre o          |------------------------->
                         |          |    100 F2
                         |          |<-------------------------
                         |          |    180(To tag=A) F3
                     Ear |          |<-------------------------
          dialog(B)      |          |
      forked new DSM     |          |    180(To tag=B) F4
          Ear o..........|..........|<-------------------------
              |          |          |
              |          |          |    200(A) F5
   terminate->|.....Mora |..........|<-------------------------
     early    |          | ^        |    ACK(A) F6
      media   |      Est | |        |------------------------->
              |          | |        |
              |          | |64*T1   |
              |          | |(13.2.2.4 of RFC 3261 [1])
              |          | |        |
              |          | |        |
              |          | V        |
              o..........|.(terminate INVITE transaction)
          terminated     |          |
           dialog(B)     |          |
                         |          |

         Figure 4: Receiving 1xx responses with different To tags

   The figure above shows the DSM inside a SIP TU.  Triggered by the
   reception of a provisional response with a different To tag (F4
   180(To tag=B)), the DSM forks and the early dialog B is generated.
   64*T1 seconds later later, dialog A receives a 200 OK response.  Dialog B,
   which does not transition to the Established state, terminates.

   Next, the behavior of a TU which that receives multiple 2xx responses with
   different To tags is explained.  When a mortal early dialog, which dialog that did
   not match the first 2xx response that the TU received, received receives
   another 2xx response which that matches its To tag before the 64*T1 INVITE
   transaction timeout, its DSM transitions to the Confirmed state.
   However, the session on the mortal early dialog is terminated when
   the TU receives the first 2xx to establish a dialog, so no session is
   established for the mortal early dialog.  Therefore, when the mortal
   early dialog receives a 2xx response, the TU sends an ACK and,
   immediately after, the TU usually sends a BYE to terminate the DSM.
   (In special cases, e.g. e.g., if a UA intends to establish multiple
   dialogs, the TU may not send the BYE.)
   The handling of the second early dialog after receiving the 200 for
   the first dialog is quite appropriate for a typical device, such as a
   phone.  It is important to note that what is being shown is a typical
   useful action and not the only valid one.  Some devices might want to
   handle things differently.  For instance, a conference focus that has
   sent out an INVITE that forks may want to accept and mix all the
   dialogs it gets.  In that case, no early dialog is treated as mortal.

   Below is an example sequence in which two 180 responses with a
   different To tag are received and then a 200 response for each of the
   early dialogs is received.

                                   UAC
                    dialog(A)       |    INVITE F1
                     Pre o          |----------------------->
                         |          |    100 F2
                         |          |<-----------------------
                         |          |    180(To tag=A) F3
         dialog(B)   Ear |          |<-----------------------
     forked new DSM      |          |    180(To tag=B) F4
          Ear o..........|..........|<-----------------------
              |          |          |
              |          |          |    200(A) F5
   terminate->|.....Mora |..........|<-----------------------
     early    |          | ^        |    ACK(A) F6
      media   |      Est | |        |----------------------->
              |          | |64*T1   |
              |          | |        |    200(B) F7
         Mora |..........|.|........|<-----------------------
              |          | |        |    ACK(B) F8
          Est |..........|.|........|----------------------->
              |          | |        |    BYE(B) F9
         Mort |..........|.|........|----------------------->
          ^   |          | |        |    200(B) F10
          |   |          | |        |<-----------------------
          |Timer K       | |        |
          |   |          | V        |
          |   |          | (terminate INVITE transaction)
          V   |          |          |
         Morg o          |          |
                         |          |

     Figure 5: Receiving 1xx and 2xx responses with different To tags

   Below is an example sequence when a TU receives multiple 200
   responses with different To tags before the 64*T1 timeout of the
   INVITE transaction in the absence of a provisional response.  Even
   though a TU does not receive a provisional response, the TU needs to
   process the 2xx responses (See (see Section 13.2.2.4 of RFC 3261 [1]).  In
   that case, the DSM state is forked at the Confirmed state, and then
   the TU sends an ACK for the 2xx response and, immediately after, the
   TU usually sends a BYE.  (In special cases, e.g. e.g., if a UA intends to
   establish multiple dialogs, the TU may not send the BYE.)

                                 UAC
                  dialog(A)       |    INVITE F1
                   Pre o          |----------------------->
                       |          |    100 F2
                       |          |<-----------------------
                       |          |    180(To tag=A) F3
                   Ear |          |<-----------------------
                       |          |
                       |          |    200(A) F4
                  Mora |..........|<-----------------------
                       | ^        |    ACK(A) F5
                   Est | |        |----------------------->
                       | |        |
       dialog(B)       | |64*T1   |
   forked new DSM      | |        |    200(To tag=B) F6
       Mora o..........|.|........|<-----------------------
            |          | |        |    ACK(B) F7
        Est |..........|.|........|----------------------->
            |          | |        |    BYE(B) F8
       Mort |..........|.|........|----------------------->
        ^   |          | |        |    200(B) F9
        |   |          | |        |<-----------------------
        |   |          | V        |
        |Timer K       | (terminate INVITE transaction)
        |   |          |          |
        V   |          |          |
       Morg o          |          |
                       |          |

         Figure 6: Receiving 2xx responses with different To tags

   Below is an example sequence in which the option tag 100rel (RFC 3262
   [5]) is required by a 180.

   If a forking proxy supports 100rel, it transparently transmits to the
   UAC a provisional response which that contains a Require header with the
   value of 100rel.  Upon receiving a provisional response with 100rel,
   the UAC establishes the early dialog (B) and sends PRACK. PRACK (Provisional
   Response Acknowledgement).  (Here, also, every transaction completes
   independently of others.)
   As in Figure 4, the early dialog (B) terminates at the same time the
   INVITE transaction terminates.  In the case where a proxy does not
   support 100rel, the provisional response will be handled in the usual
   way (a provisional response with 100rel is discarded by the proxy,
   not to be transmitted to the UAC).

                                UAC
                 dialog(A)       |    INVITE F1
                  Pre o          |------------------------->
                      |          |    100 F2
                      |          |<-------------------------
                      |          |    180(To tag=A) F3
                  Ear |          |<-------------------------
                      |          |    200(A) F4
                 Mora |..........|<-------------------------
                      | ^        |    ACK(A) F5
                  Est | |        |------------------------->
       dialog(B)      | |        |
   forked new DSM     | |        |    180(To tag=B) w/100rel F6
       Ear o..........|.|........|<-------------------------
           |          | |        |    PRACK(B) F7
           |          | |        |------------------------->
           |          | |        |    200(B,PRACK) F8
           |          | |        |<-------------------------
           |          | |64*T1   |
           |          | |(13.2.2.4 of RFC 3261 [1])
           |          | |        |
           |          | |        |
           |          | |        |
           |          | V        |
           o..........|.(terminate INVITE transaction)
       terminated     |          |
        dialog(B)     |          |
                      |          |

         Figure 7: Receiving 1xx responses with different To tags
   when using the mechanism for reliable provisional responses (100rel)

Authors' Addresses

   Miki Hasebe
   NTT-east Corporation
   19-2 Nishi-shinjuku 3-chome
   Shinjuku-ku, Tokyo  163-8019
   JP

   Email:

   EMail: hasebe.miki@east.ntt.co.jp

   Jun Koshiko
   NTT-east Corporation
   19-2 Nishi-shinjuku 3-chome
   Shinjuku-ku, Tokyo  163-8019
   JP

   Email:

   EMail: j.koshiko@east.ntt.co.jp

   Yasushi Suzuki
   NTT Corporation
   9-11, Midori-cho 3-Chome
   Musashino-shi, Tokyo  180-8585
   JP

   Email:

   EMail: suzuki.yasushi@lab.ntt.co.jp

   Tomoyuki Yoshikawa
   NTT-east Corporation
   19-2 Nishi-shinjuku 3-chome
   Shinjuku-ku, Tokyo  163-8019
   JP

   Email:

   EMail: tomoyuki.yoshikawa@east.ntt.co.jp

   Paul H. Kyzivat
   Cisco Systems, Inc.
   1414 Massachusetts Avenue
   Boxborough, MA  01719
   US

   Email:

   EMail: pkyzivat@cisco.com

Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.